Stainless Steel Railing Engineering Process

Stainless steel nose is made of 3mm thick sanding board. The main part of the board is laser cut, and the V-cut is made after the laser cut because we must ensure the corners are beautiful. Welding after bending. This welding is very difficult, not only to ensure the angle of each post but also full welding without deformation, to ensure the beauty of the post. The 3mm thick plate is easily deformed by full welding. We are all welded by welding workers who have good welding technology and have been welding for more than 10 years. Their welding is meticulous, and every weld is strictly controlled. Welding the edges after welding the main body.

Bull-nose is very easy to break and bruise during working. After the main body is welded, the side is welded, and then the steel fixed support is welded inside. This piece is also a connecting piece. The fixed support ensures that the entire large post is very very strong. Grinding after welding, and then manually repairing the surface of the weld. The QC checks the dimensions, the outer surface, and the titanium is added after welding. One 5.8m deep furnace can only be plated with one part. After the gold plating, it is spliced to a height of 10m. The rest can only be shipped to Dubai and then put into 20m high. SGS shall be inspected before delivery. Check dimensions, surfaces, welds, links, materials. Big job for SGS.